Farberware Heat Control - P13-590 - CO-PR3F
Replacement automatic heat control will fit most Farberware electric skillets, woks , griddles etc. This control will replace any original Farberware model 100 or 101 controller. Works with electric skillet models 260,310,312,312,330,344,B3000,B2000,FSS300 and more. The pin spacing on these controls is 1 9/16" wide from center to center on the element pins on your electric cookware.
Posted by Bruce Matuson on 30th Mar 2018
Found this controller while searching on Google. The skillet was in good shape and was stainless so we could brown in it. The new ones with non-stick don't brown.
Posted by SDC on 19th Jan 2017
Works as described. Fits tight in farberware fry pan but seems to work properly.
Should loosen as you use it.
Posted by Unknown on 8th Sep 2016
My item arrived in great shape but was delayed in shipment due to a delay in the postal system. I'm happy to report that the new controller works great and fits snuggly in the pan heater contacts. My old one had loose contacts which caused excessive heating in the controller and eventually quit working due to metal fatigue. The new controller fits quite well insuring good contact with the pan heater contacts. Thanks for providing a new life to our old pan.
Posted by charlotte Huston on 7th Aug 2016
I love the replacement for my old electric frying pan. the plug was worn out and my new replacement is like having a brand new fying pan. thank you Cerini!!
Posted by Unknown on 10th Jun 2016
I'm guessing this control is not a Farberware product (OEM) as it is a tight fit in the pan connector. It does work though. I've noticed the temperature settings for cooking are a little different and slightly higher settings are necessary.
Posted by Linda on 26th Dec 2015
Looked high and low for a replacement part for my very old Farberware griddle and here is where I found it. Bit of a tight fit but works like a charm. Ordering was fast and easy.
A Very Useful Replacement
Posted by Unknown on 4th Jan 2015
As promised, the Farberware Heat Control - P13-590 works just fine with my old, old, OLD electric skillet, whose original heat control finally shorted out after many, many years of service. The information sheet that accompanied the replacement said the connectors would be snug at first, and need a bit more than usual force to attach to the skillet, but that was no problem, and becomes easier with use.
The control seems to provide a higher heat than the old one it replaced, but with practice that is not a problem either.
I'm so very pleased to be able to continue using my faithful old Farberware Electric Skillet, and I'm also very happy with the helpful, prompt and courteous assistance provided by Cerini's.