Categories

Site Information

 Loading... Please wait...
  • Call us on 718-584-3449
  • My Account
  • Gift Certificates

Need to Replace Eaton CP1 Pump?

Posted by Johnny Cerini on

Question:

Eaton CP1

I need to replace the pump on my Gaggia Brevetti, which is a lot like the Gaggia Classic. The pump is an Eaton CP1. I am attaching a picture. There seem to be several very similar Ulka pumps, but I don’t know which is right for this. The inlet has a barbed fitting for a rubber elbow, and the outlet has a threaded female fitting to take the brass elbow that is in the picture. The specs. stamped on the pump are 110/120 V~ 60Hz, 180 VA 1 min/1 min (what does that mean?) Tm 25C Tu 60C (don’t know what that means either) Mod CP1.

Answer: 

The Eaton CP1 pump is no longer produced.   We recommend you replace the pump with a Ulka EAP5 or EAX5 pump.  The ulka Eax5 has the same 15 bar pressure as the Eaton CP1, but has a better flow rate of 1/1.5. 

Click the link below to order a ulka EAX5.

https://www.cerinicoffee.com/ulka-vibratory-pump-e...

comments powered by Disqus