Need to Replace Eaton CP1 Pump?
I need to replace the pump on my Gaggia Brevetti, which is a lot like the Gaggia Classic. The pump is an Eaton CP1. I am attaching a picture. There seem to be several very similar Ulka pumps, but I don’t know which is right for this. The inlet has a barbed fitting for a rubber elbow, and the outlet has a threaded female fitting to take the brass elbow that is in the picture. The specs. stamped on the pump are 110/120 V~ 60Hz, 180 VA 1 min/1 min (what does that mean?) Tm 25C Tu 60C (don’t know what that means either) Mod CP1.
The Eaton CP1 pump is no longer produced. We recommend you replace the pump with a Ulka EAP5 or EAX5 pump. The ulka Eax5 has the same 15 bar pressure as the Eaton CP1, but has a better flow rate of 1/1.5.
Click the link below to order a ulka EAX5.