Descaling an Saeco Odea Giro / Giro Plus
DESCALING When performing a descaling cycle, it is necessary to be present during the entire process (about 40 minutes). Caution! Do not use vinegar as a descaler. Need Descaling Solution. Click here >>
Note: before starting a descaling cycle make sure that:
- a container of adequate size is available;
- if the “Aqua Prima” or "intenza filter is used, make sure that it has been removed before descaling the machine.
Resetting the descale message on the odea. Make sure you hold the water or steam button until the descaling light goes off. This usually take 6 seconds. see below.
If you need descaling solution please click here